Name: Republic Locker Door Complete Replacement Handle Assy, RH, 1965 - Present
Brand: Republic Storage Systems, LLC
SKU: RS-1105-RH
Price: 5.91 USD
Availability: InStock

Republic Locker Door Complete Replacement Handle Assy, RH, 1965 - Present

SKU:

RS-1105-RH

MFG Part #:

SEE NOTES

Description

DESCRIPTION

Replacement handle assembly for Republic Steel lockers. Complete with lift (#RS-1198), housing (#RS-1197) and screws.

Material
Lift and housing	: Zinc die-cast, chrome plated
Bumper for lift	: Gray, non-marking rubber
Lift
Height
Upper grip (textured half)	: 15/16"
Lower half	: 1-5/16"
Both parts	: 2-1/2"
Depth
Upper half
Including mounting pegs	: 1-1/2"
Not including mounting pegs	: 11/16"
Lower half
Including mounting pegs	: 1-9/32"
Not including mounting pegs	: 9/16"
Thickness
Top and back edge	: 5/16"
Textured grip on upper half	: 3/32"
Grip style	: 1/16" Concave squares
There are flat platforms that lay between, and perpendicular to
the grip handle and mounting pegs, forming a base and stop
for the mounting pegs. The flat platforms butt up against
the outside of the door when the handle is in place. The
mounting pegs extend back off the platforms, then to the left
on a 90o bend and into the side of the lockbar.
Platforms
Qty	: 2 Each, 1 under each mounting peg
Width	: 5/16"
Length	: 9/16"
Thickness	: 3/32"
Mounting pegs
Qty	: 2 Each
Length
To center of bend, from the platform	: 7/16"
From the center of the bend to the tip	: 11/32"
Height
At platform	: 3/8"
At tips	: 5/16"
Width	: 3/16"
Peg to peg OC	: 1-1/8"
There are two bumpers, one between each platform and the
handle portion, which act to keep the lift portion from
'clanging' against the housing as it moves up and down.
Width	: 9/32"
Height	: 1/4"
Depth	: 3/16"
Padlock hole dia	: 3/8"
Housing
Thickness	: varies, from 1/32" to 1/8" around the
different parts of the housing
Height	: 3-13/16"
Width - wider at the top than the bottom
Base - wider in back than in front
Front
Top	: 13/16"
Bottom	: 9/16"
Back
Top	: 29/32"
Bottom	: 5/8"
Kick-proof hood
Front	: 15/32"
Back, where it joins base	: 1/2"
Lift slot
Width	: 13/32"
Depth (open top of hood)	: 1/2"
Height (front of base)	: 7/8"
Mounting hole
Qty	: 2 each - top hole is exposed, and accessible from
the front of the housing, the bottom hole is concealed
on the front and accessible only from the back.
Dia	: 1/8"
Hole to hole OC	: 2-7/16"
Distance to center of top hole from top edge of housing	: 5/8"
Distance to center of bottom hole from bottom edge of
housing	: 23/32"
Padlock hole dia	: 3/8"
Mounting hardware (for housing)
2 Each 8-32 X 5/16" Phillips head sems screw

Questions about Republic Locker Door Complete Replacement Handle Assy, RH, 1965 - Present?

Please contact us with any questions you have about Republic Locker Door Complete Replacement Handle Assy, RH, 1965 - Present and we'll be in touch.