Name: Penco Lift and Plastic Trigger for Recessed Locker Handle Assembly, RH, Gray
Brand: PENCO PRODUCTS, INC.
SKU: PN-333R
Price: 10.44 USD
Availability: InStock

Penco Lift and Plastic Trigger for Recessed Locker Handle Assembly, RH, Gray

SKU:

PN-333R

MFG Part #:

608930C

Description

DESCRIPTION

Replacement right hand lift for the Penco recessed locker handle PN-3331. Includes plastic trigger.

Material
Lift	: Steel
Trigger	: Plastic
Thickness	: 5/64" (between 1/16" and 3/32")
LIFT
Back side
Height	: 4-1/4"
Width of back plate (measurements taken from the back)
At top	: 2-3/32"
At middle	: 23/32"
At bottom	: 1-1/8"
There is a tab at the bottom, which is bent to the back
at a 90o angle
Height	: 21/32"
Depth	: 1/2"
Side that mounts to the lockbar. There is a shorter front half
and a taller back half, both, combined are the same height as
the back of the lift.
Front half
Height, not including finger tab	: 2-5/16"
Width	: 11/16"
Finger tab (fits into lockbar)
Height	: 13/32"
Width
At the base	: 5/32"
At the tip	: 9/64" (Between 1/8" and 5/32")
The tab is bent out and up, to fit into a hole in the
lockbar. The distance between inside of the tab
and the outside wall of the lift
At base of bend	: 3/32"
AT tip of finger	: 1/8"
Mounting hole
Qty	: 1
Dia	: 3/16"
Distance from bottom of the lift to the center of
the mounting hole	: 9/32"
The front half of the side fo the lift is offset to just
outside the back half
Offset amount	: 1/16"
Back half
Height	: 4-1/4"
Depth	: 21/32"
Finger lift side
Top portion - a horizontal tab
Depth	: 1-3/16"
Height	: 3/4"
Lower portion - a tab that extends vertically down from
the top portion. The PN-333T plastic trigger has a
slot in it's middle which slides over and is mounted onto
this portion.
Depth	: 3/4"
Height	: 9/16"
Padkick hole dia	: 3/8"
Height of top and lower portions combined	: 1-5/16"
Plastic trigger (PN-333T). The top third is wider than
the lower two thirds. In addition, there is a rounded
concave cutout at the bottom of the trigger, which has
side-to-side grooves like the edge of a dime
Height
Upper portion	: 7/16"
Lower portion
To the center	: 3/4"
To the outside edges	: 7/8"
Total height
To the center of the cutout	: 5/32"
To the outside edges	: 1-5/16"
Depth
Upper portion	: 1-5/64" (BETWEEN 1-1/16" AND 1-3/32")
Lower portion	: 1-1/64"
Thickness
Upper portion	: 9/16"
Lower portion	: 11/32"
Padlock hole dia	: 3/8"
Mounting hole - has a round, recessed area on each side
before the mounting hole starts
Recess
Dia	: 5/16"
Depth	: 3/32"
Mounting hole
Dia	: 1/8"
Depth	: 3/8"

Questions about Penco Lift and Plastic Trigger for Recessed Locker Handle Assembly, RH, Gray?

Please contact us with any questions you have about Penco Lift and Plastic Trigger for Recessed Locker Handle Assembly, RH, Gray and we'll be in touch.