Quickship
PENCO PRODUCTS, INC.
Penco Cup for Recessed Locker Handle Assembly, mounting hardware included
$12.66
- SKU:
- PN-333H
- MFG Part #:
- 60890H
DESCRIPTION
Replacement recessed cup only for the PN3331 recessed handle assembly.SPECIFICATIONS
| Material | brushed stainless steel |
| Thickness | 1/32", 22 gauge |
| Outside height | |
| In middle | 5-1/2" |
| At outside corners | 5" |
| Inside height | 4-7/16" |
| Outside width | |
| At top | 4" |
| At bottom | 3-7/16" |
| Inside width | |
| At top | 3-5/16" |
| At bottom | 2-13/16" |
| Front edge | |
| Width | |
| Top | 15/32" |
| Sides | 5/16" |
| Bottom | |
| In middle | 5/8" |
| At outside corners | 5/16" |
| Depth | 1-3/8" |
| There are two tabs at the top of the cup, which fit into | |
| the locker door to hold it in place | |
| Width of each | 1/2" |
| Height of each | 1/4" |
| Depth the tab is set back from the front face of the cup | |
| At the base of the tab | 3/16" |
| At the top of the tab | 5/32" |
| Tab to tab OC | 2-7/32" |
| Inside distance from tab to tab | 1-3/4" |
| There is a hole at the bottom of the front face for securing | |
| the bottom of the cup to the locker with a screw | |
| Shape | elongated oval |
| Length | 15/64" (Between 7/32" and 1/4") |
| Height | 11/64" (Between 5/32" and 3/16") |
| Holes for combination lock | |
| Qty | 3 each |
| 1 each large holes in the center | |
| 2 each small | 1 above and 1 below the large hole |
| Diameter | |
| Large hole | 21/32" |
| Small holes | 7/32" |
| Hole to hole OC | |
| From small hole to large hole | 1-1/8" |
| From small hole to small hole | 2-3/16" |
| Distance from bottom edge of cup to bottom edge of the bottom | |
| mounting screw hole, on the front side of the cup | 7/16" |
| Distance from back edge of lift slot to top edge of top small | |
| mounting screw hole, on the front side of the cup | 1-1/16" |
| There is a slot at the top of the cup into which the plastic | |
| trigger portion of the PN-333L or PN-333R lift fits | |
| Width | 1/2" |
| Length | 1-1/8" |
| Mounting hardware (included) | |
| 1 each 8-32 x 3/8" shoulder machine screw. This screw has a | |
| special prism cut head (decoration). The shoulder is the | |
| same shape as the mounting hole on the lower front face of | |
| the housing. | |
| 1 each 8-32 nylon locking nut | |
Questions about Penco Cup for Recessed Locker Handle Assembly, mounting hardware included?
Please contact us with any questions you have about Penco Cup for Recessed Locker Handle Assembly, mounting hardware included and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
Quickship
prev
next
