Name: Lyon Locker LH Recessed Lift, 1988 to Present
Brand: LYON
SKU: LY-2224-LH
Price: 19.53 USD
Availability: InStock

Lyon Locker LH Recessed Lift, 1988 to Present

SKU:

LY-2224-LH

MFG Part #:

6750

Description

DESCRIPTION

Replacement left hand lift handle for Lyon locker, use with recessed handle LY2237.

Material
Slide lift	: Steel
Finger lift	: Black nylon
This item is a piece of steel with cutouts and 90o bends in it.
As the piece faces you, with two bends pointed towards you and
one bend pointing away from you, it consists of the following	:
- A lockbar mounting side on the right. which is bent forward and
has two triangular tabs that bend out to the right and fit into
the lockbar, and a single mounting hole between them
- A back portion, which is wider on the top than the bottom
- An upper right section, which bends facing you, and has an
oval padlock hole in it. The nylon finger lift, which also
has an oval padlock hole in it, snaps over this section
- A lower right lock stop tab, which bends facing away from you.
This tab acts as a stop for the bolt on a combination lock,
and the lift can not go up until the bolt is turned in
and out of this tab's way.
Height of lift	: 5-1/8"
Right lockbar mounting portion
Depth
Top and bottom	: 1"
By mounting tabs	: 1-3/16"
Tabs
Qty	: 2
Width	: 5/16"
Height off surface	: 3/16"
Mounting hole
Qty	: 1
Shape	: Slightly oval
Height	: 13/64" (between 3/16" and 7/32")
Width	: 15/64" (between 7/32" and 1/4")
Back portion
Width
At top	: 2"
At bottom	: 15/16"
Height of upper section	: 1-7/16"
Left portions
Top tab (the nylon lift finger mounts to this)
Height	: 1-7/16"
Depth	: 1-1/32"
Padlock hole
Shape	: OvaL
Height	: 3/8"
Depth	: 1/2"
There is a round dimple that the lift snaps over
Dia	: 3/16"
Height off surface	: 1/8"
Nylon finger lift - the front edge is wider and longer than the
rest of the finger lift. As it faces you, the shape looks like
an arrow pointing down - wide at the top, like arrow feathers,
becomes narrow in the middle, then wide again, angling down to
a soft point at the bottom. The finger lift is slotted in the
back to fit over the steel tab on the slide lift.
Height
In front	: 1-3/4"
In back	: 1-1/2"
Width
In front	: 9/16"
In back	: 1/4"
Depth
Upper front portion	: 3/16"
Lower front portion	: 7/16"
Upper back portion	: 27/32"
Lower back portion	: 19/32"
Padlock hole - oval
Height	: 7/16"
Width	: 17/32"
Bottom tab / lock stop	:
Height	: 1-1/14"
Depth	: 11/32"

Questions about Lyon Locker LH Recessed Lift, 1988 to Present?

Please contact us with any questions you have about Lyon Locker LH Recessed Lift, 1988 to Present and we'll be in touch.