DESCRIPTION
LCN Door Closer w/Alum Finish, RH.| MATERIAL | |
| BODY | : CAST IRON |
| ARM | : FORGED STEEL (STRONGER THAN STAMPED STEEL) |
| PINION | : DOUBLE HEAT TREATED STEEL |
| FINISH | : ALUMINUM |
| MOUNTING (BOLT) HOLES | |
| CLOSER BODY | |
| QTY | : 2 ON TOP, 2 ON BOTTOM, 4 TOTAL |
| HOLE TO HOLE OC | |
| SIDE TO SIDE | : 6" |
| TOP TO BOTTOM | : 2-1/2" |
| ARM | |
| QTY | : 2 EACH ON TOP, 2 EACH ON BOTTOM, 4 TOTAL |
| HOLE PATTERN | : THE 2 ON TOP ARE CLOSER TOGETHER THAN |
| THE 2 ON BOTTOM | |
| HOLE TO HOLE OC | |
| TOP 2 HOLES | : 2-1/8" |
| BOTTOM 2 HOLES | : 3-3/8" |
| FROM TOP HOLES TO BOTTOM HOLES | : 3/8" |
| PLACEMENT ON DOOR | : PUSH SIDE (OPPOSITE OF HINGE SIDE) |
| DEGREE OF DOOR SWING | : THIS COMES STANDARD WITH |
| AN EDA (EXTRA DUTY) ARM. THE CUSTOMER CAN | |
| ADJUST HIS TEMPLATE FOR ANY OF THE FOLLOWING | |
| BEFORE HE INSTALLS IT ON THE DOOR | : |
| - 100o | |
| - 140o | |
| - 180o | |
| CYLINDER SIZE | : 4011 |
| THIS SIZE IS ADJUSTABLE FROM 1-5 AND IS SHIPPED SET TO SIZE 3. | |
| BECAUSE OF ITS SIZE RANGE, IT HANDLES A RANGE OF DOOR SIZES. | |
| - INTERIOR DOORS, FROM 28"-54" | |
| - EXTERIOR AND VESTIBULE DOORS, FROM 28"-48" | |
| - ADA DOORS, FROM 36"-48"* | |
| * THE MANUFACTURER NOTES THAT, WHILE THIS CLOSER IS TESTED AND | |
| CERTIFIED UNDER ANSI STANDARD A156.4, GRADE ONE, THAT ANY | |
| MANUAL DOOR CLOSER LIKE THIS ONE THAT IS SELECTED, INSTALLED, | |
| AND ADJUSTED BASED ON ADA OR OTHER REDUCED OPENING FORCE | |
| REQUIREMENTS MAY NOT PROVIDE SUFFICIENT POWER TO RELIABLY CLOSE | |
| AND LATCH A DOOR. THEY RECOMMEND A POWER OPERATOR INSTEAD. | |
Questions about LCN Door Closer w/Alum Finish, RH?
Please contact us with any questions you have about LCN Door Closer w/Alum Finish, RH and we'll be in touch.
Related Products
