Quickship
Accurate Partitions
Hardware kit, with vault hinges for Solid Plastic, inswing door
- SKU:
- TP 8571000
- MFG Part #:
- 40-8571007
DESCRIPTION
Replacement door hardware kit for Accurate solid plastic partitions. Kit includes stainless steel top & bottom hinges, strike, keeper, bumper hook and all mounting hardware.| Brand | : Accurate Partitions |
| Application | : For use on square edged, plastic laminate, |
| 1" thick inswing door and 1" thick pilaster | |
| This kit consists of the following (technical information follows | |
| below in the order each of these part appear) | : |
| - 1 Each 40-2562820 Top vault hinge, pilaster side | |
| - 1 Each 40-2562830 Top vault hinge, door side | |
| - 1 Each 40-2562840 Bottom vault hinge, pilaster side | |
| - 1 Each 40-2562850 Bottom vault hinge, door side | |
| - 1 Each 40-2563900 Slide latch | |
| - 1 Each 40-2562740 Inswing strike/keeper with emergency access | |
| - 1 Each 40-2511700 Door pull handle | |
| - 1 Each 40-2561600 Bumper coat hook | |
| - 1 Each 40-2511710 Wall bumper | |
| - 8 Each 40-3260600 10-24 x 1" Torx shoulder screw | |
| - 1 Each 40-3260750 10-24 x 3/4" Torx shoulder screw | |
| - 8 Each 40-3260590 10-24 x 1/2" Torx barrel nut | |
| - 1 Each 40-3260690 10-24 x 5/8" Torx barrel nut | |
| - 4 Each 40-3262130 10-24 x 5/8" Torx pan head sheet metal screw | |
| Top hinge - consists of a door-side piece and a pilaster-side piece | |
| Material | : Stainless steel, brushed finish. Door-side piece |
| has a white nylon insert which fits down over a post on | |
| the pilaster-side piece. | |
| Door-side piece - consists of a horizontal 'U' bracket over a | |
| pivot cylinder with nylon insert | |
| Overall size | |
| Height | : 1-3/4" |
| Length | : 2-1/4" |
| Width, at widest portion | : 1-3/4" |
| Material thickness | : 3/32" - 11/32" |
| Horizontal U-bracket | |
| Length | : 2-1/4" |
| Height | : 25/32" - 15/16" |
| Distance between forks | : 1-1/64" |
| Mounting holes | |
| Qty | : 2 per fork |
| Diameter | |
| Inside | : 9/32" |
| Outside | : 15/32" |
| Hole to hole OC | : 1-1/2" |
| Pivot cylinder with nylon insert | |
| Steel portion | |
| Thickness | : 5/32" |
| Depth | : 3/4" |
| Outside dia | : 1-3/16" |
| Nylon insert | |
| Thickness | : 7/32" |
| Depth | : 13/16" |
| Inside dia | : 1/2" |
| Pilaster-side piece - consists of a vertical 'U' bracket on one side | |
| and a horizontal pocket with a swivel post on the other side, | |
| which fits into the nylon insert on the door side piece | |
| Overall size | |
| Height | : 2-7/32" |
| Length | : 2-3/4" |
| Width | : 1-3/4" |
| Material thickness | : 3/32" - 11/32" |
| Vertical U-bracket | |
| Distance between forks | : 1-1/64" |
| Mounting holes | |
| Qty | : 2 per fork |
| Diameter | |
| Inside | : 9/32" |
| Outside | : 15/32" |
| Hole to hole OC | : 1-1/2" |
| Horizontal pocket | |
| Height | : 15/16" |
| Inside dia | : 1-1/4" |
| Swivel post | |
| Height | : 13/16" |
| Dia | : 15/32" |
| Bottom hinge - consists of a door-side piece and a | |
| pilaster-side piece | |
| Material | : Stainless steel, brushed finish. |
| Door-side piece - consists of a horizontal 'U' bracket over a | |
| beveled cylinder that has a hinge pin in the center of it. | |
| The beveled cylinder moves and rotates against a beveled | |
| nylon cam in the pilaster-side piece | |
| Overall size | |
| Height | : 2-13/16" |
| Length | : 2-1/4" |
| Width, at widest portion | : 1-3/4" |
| Material thickness | : 3/32" - 11/32" |
| Horizontal U-bracket | |
| Length | : 2-1/4" |
| Height, at highest point | : 1-3/16" |
| Distance between forks | : 1-1/64" |
| Mounting holes | |
| Qty | : 2 per fork |
| Diameter | |
| Inside | : 9/32" |
| Outside | : 15/32" |
| Hole to hole OC | : 1-1/2" |
| Beveled cylinder with hinge pin | |
| Cylinder portion | |
| Thickness | : 9/32" |
| Height, at highest point | : 5/8" |
| Outside dia | : 1-3/16" |
| Hinge pin | |
| Length | : 1-13/32" |
| Dia | : 1/4" |
| Pilaster-side piece - consists of a vertical 'U' bracket on one | |
| side and a horizontal pocket that has a beveled nylon cam | |
| assembly with a hinge pin hole in the center of it. The | |
| assembly is held in place with an internal tooth washer and | |
| hex nut, for setting the door opening | |
| Overall size | |
| Height | : 3-1/8" |
| Length | : 2-25/32" |
| Width | : 1-3/4" |
| Material thickness | : 3/32" - 11/32" |
| Vertical U-bracket | |
| Distance between forks | : 1-1/64" |
| Mounting holes | |
| Qty | : 2 per fork |
| Diameter | |
| Inside | : 9/32" |
| Outside | : 15/32" |
| Hole to hole OC | : 1-1/2" |
| Horizontal pocket | |
| Height | : 15/16" |
| Inside dia | : 1-1/4" |
| Nylon cam | |
| Height, at highest point | : 11/16" |
| Dia | : 1-3/16" |
| Hinge pin hole dia | : 9/32" |
| Bumper/keeper - consists of | : |
| - A U-bracket with a bumper holder coming off one corner, | |
| in line with the forks of the U-bracket | |
| - An emergency access style keeper coming off the other corner, | |
| in line with the face of the U-bracket | |
| Material | : Stainless steel, brushed finish, w/black rubber bumper |
| Overall height | : 1-1/2" |
| Forks | |
| Material thickness | : 1/8" - 3/16" |
| Length | |
| Inside | : 1-1/4" |
| Outside | : 1-3/8" |
| Distance between forks | : 1-1/64" |
| Mounting holes | |
| Qty | : 1 per fork |
| Dia | : 17/64" (between 1/4" and 9/32") |
| Distance from back edge of fork to center of hole | : 5/8" |
| Bumper/strike portion | |
| Material thickness | |
| Metal portion | : 6/32" - 3/16" |
| Bumper | : 5/32" |
| Height of both | : 1-1/2" |
| Depth | |
| Metal | : 1/2" |
| Bumper | : 7/16" |
| Face width | : 1-5/32" |
| Keeper portion | |
| Style | : Emergency access - has an open slot at |
| the top and bottom of the keeper | |
| Slot size | |
| Width | : 1/4" |
| Height | : 5/16" |
| Distance from face of bumper to inside edge of slot | : 1-11/32" |
| Overhang of keeper off fork | : 3/8" |
| Slide latch - consists of a mounting plate, a slide bolt and knob | |
| Material | : Stainless steel, brush finish |
| Mounting plate | |
| Material thickness | : 1/16" |
| Height | : 3-1/4" |
| Width | : 1-1/2" |
| Depth | : 1/4" |
| Mounting holes | |
| Qty | : 2 |
| Dia | : 17/64" (between 1/4" and 9/32") |
| Hole to hole OC | : 2-3/4" |
| Slide bolt | |
| Shape | : Flat, rectangular |
| Height | : 13/16" |
| Length | : 2-3/16" |
| Thickness | : 3/16" |
| Distance from underside of bolt to mounting surface | : 9/32" |
| Length of overhang when fully bolt is fully slid to the | |
| left or the right | : 23/32" |
| Slide knob | |
| Shape | : Oval |
| Height | : 7/8" |
| Width | : 5/8" |
| Depth | : 9/16" |
| Overall depth of latch, from face of slide knob | |
| to mounting surface | : 1-1/16" |
| Bumper coat hook | |
| Material | |
| Hook | : Stainless steel, satin finish |
| Bumper | : Black rubber |
| Overall length, from mounting surface to rubber tip | : 3-1/16" |
| Hook qty | : 1 upper, long and straight hook |
| 1 lower, short and curved | |
| Upper straight hook | |
| Length, from face of mounting plate | : 2-31/32" |
| Dia | : 17/64" (between 1/4" and 9/32") |
| Bumper | |
| Dia | : 9/16" |
| Depth | : 7/16" |
| Lower curved hook | |
| Hook dia | : 1/4" |
| Inside dia of curve | : 1" |
| Amount of space between tip of lower hook and | |
| stem of upper hook | : 5/8" |
| Mounting holes | |
| Qty | : 2 each |
| Dia | : 7/32" |
| Type | : Slightly countersunk from the back |
| Hole to hole OC | : 7/8" |
| Thickness of mounting plate | : 3/32" |
| Mounting fasteners - See top of page for sizes | |
| Material | : Stainless steel |
Questions about Hardware kit, with vault hinges for Solid Plastic, inswing door?
Please contact us with any questions you have about Hardware kit, with vault hinges for Solid Plastic, inswing door and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
Quickship
Quickship
