Quickship
Interior Steel
Handle For Interior Steel Expanded Metal Locker; Includes Handle, Washer And Nut
$31.25
- SKU:
- IS-4454
- MFG Part #:
- 3099
DESCRIPTION
Handle For Interior Steel Expanded Metal Locker; Includes Handle, Turn Plate And Nut.
SPECIFICATIONS
| MATERIAL | |
| TURN HANDLE AND NUT | CHROME PLATED BRASS |
| WASHER | STEEL |
| TURN HANDLE - THIS PIECE IS SHAPED LIKE A 'C', AND CONSISTS OF | |
| THE FOLLOWING | |
| - THE TOP, HORIZONTAL PORTION | |
| - THE UPPER HORIZONTAL STEM, FLARING OUT INTO | |
| - A ROUND BELL SHAPE, THE LARGE PORTION CONNECTING TO | |
| - A SMALLER, ROUND SHOULDER, CONNECTING TO | |
| - A SQUARE SHOULDER, CONNECTING TO | |
| - A THREADED STUD | |
| - THE MIDDLE, VERTICL PORTION | |
| - THE LOWER, HORIZONTAL PADLOCK HOLDER PORTION, | |
| WHICH IS SHAPED LIKE A DOUGHNUT | |
| OVERALL HEIGHT, INCLUDING THE BELL | 3-11/16" |
| TOP HORIZONTAL PORTION | |
| VERTICAL PORTION, STARTING WHERE IT BENDS OFF HORIZONTAL PORTION | |
| AND INCLUDING BELL PORTION | 1-1/8" |
| BELL DIA | 1-3/32" |
| ROUND SHOULDER DIA | 5/8" |
| SQUARE SHOULDER WIDTH AND HEIGHT | 3/8" |
| THREADED STUD | 3/8-16 X 7/16" |
| MIDDLE, VERTICAL SECTION | |
| LENGTH | |
| ON THE OUTSIDE | 3-13/32" |
| ON THE INSIDE | 2-23/32" |
| WIDTH | |
| AT THE TOP | 25/32" |
| AT THE MIDDLE | 11/16" |
| AT THE BOTTOM | 1/2" |
| THICKNESS | |
| AT THE TOP | 9/32" |
| AT THE BOTTOM | 1/4" |
| LOWER, HORIZONTAL PADLOCK PORTION. THE HANDLE RESTS HORIZONTALLY | |
| IN THE LOCKED POSITION. THERE IS A PADLOCK STAPLE ATTACHED TO | |
| THE FRONT OF THE LOCKER THAT ALSO HAS A HOLE IN IT, AND THIS | |
| HOLE LINES UP WITH THE HOLE IN THE HANDLE WHEN IT'S IN THE | |
| HORIZONTAL POSITION. ONCE A PADLOCK IS RUN THROUGH BOTH HOLES, | |
| THE HANDLE CANNOT BE TURNED, THUS THE DOOR CANNOT BE OPENED. | |
| THICKNESS | 3/16" |
| LENGTH | |
| ON THE INSIDE | 7/8" |
| ON THE OUTSIDE | 15/16" |
| DIAMETER | |
| ON THE INSIDE (PADLOCK HOLE) | 7/16" |
| ON THE OUTSIDE | 3/4" |
| TURN PLATE - THIS IS A SQUARISH SHAPED PLATE THAT HAS | |
| - THE MAIN PLATE, WITH THREE HOLES IN IT | |
| - A SQUARE HOLE NEAR IT'S CENTER THAT RECEIVES THE SQUARE | |
| SHOULDER OF THE TURN HANDLE. | |
| - TWO ROUND HOLES ON EITHER END OF THE SQUARE HOLE FOR | |
| MOUNTING THE PLATE TO THE LOCK RODS. | |
| - A LARGE TAB COMING OFF THE LEFT SIDE OF THE PLATE, WHICH LOCKS | |
| INTO THE LOCKER FRAME WHEN THE HANDLE IS IN THE HORIZONTAL, OR | |
| CLOSED POSITION. | |
| - A TRIANGULAR TAB COMING OFF THE RIGHT SIDE OF THE PLATE, | |
| WHICH RESTS JUST UNDER THE COMBINATION LOCK BOLT IN THE LOCKED | |
| POSITION (IF A COMBINATION LOCK IS USED). THE HANDLE AND PLATE | |
| CANNOT BE TURNED UNTIL THE LOCK BOLT IS TURNED OUT OF THEIR WAY. | |
| THICKNESS | 3/32" |
| MAIN PLATE | |
| WIDTH | 2" |
| HEIGHT | 2" |
| SQUARE HOLE - POSITIONED IN THE PLATE LIKE A DIAMOND SHAPE | |
| HEIGHT | 3/8" |
| WIDTH | 3/8" |
| MOUNTING HOLES | |
| DIA | 3/16" |
| HOLE TO HOLE OC | 1-1/2" |
| MOUNTING HOLE TO DIAMOND HOLE CENTER | 3/4" |
| LARGE LEFT TAB - THE TAB STARTS AT A 90o BEND FORWARD OFF | |
| THE LEFT SIDE OF THE MAIN PLATE, THEN TAKES ANOTHER 90o BEND | |
| TO THE LEFT. | |
| FORWARD PORTION | |
| HEIGHT | 1" |
| DEPTH | 7/8" |
| LEFT PORTION | |
| HEIGHT | 1" |
| WIDTH | 1" |
| RIGHT TRIANGULAR TAB | |
| HEIGHT WHERE IT COMES OFF MAIN PLATE | 9/16" |
| WIDTH | 3/8" |
Questions about Handle For Interior Steel Expanded Metal Locker; Includes Handle, Washer And Nut?
Please contact us with any questions you have about Handle For Interior Steel Expanded Metal Locker; Includes Handle, Washer And Nut and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
Quickship
prev
next
